Function Configuration And Technical Parameters

A. Feeding unit (it is separate with the first printing unit)

1.main motor

The main motor adopts frequency conversion

motor, frequency conversion controller, energy saving, stable starting, attached to the motor start protection device.

2.Lead Feeder paper system

1)Taiwan Max dura lead feeding wheel, Durable Wear Resistant.

2)Feeding counter, set, display production quantity .

3)with brush ,can dust removal device

4) The former feeder paper rubber roller (elastic rubber roller) for dynamic lift and fall , Automatically adjust the pressure, can reduce  the strength fracture of the corrugated board.

5) . flap the paperboard to orderly by electric

6).the leading edge feeding unit is separate with the first printing unit

3. Computer and electric device

1) The main motor adopts frequency conversion motor, frequency converter adopt Delta from Taiwan, energy saving and save electricity can  reach 30%.

2) Fan adopts independent inverter control, wind pressure is adjustable .

3) each unit has the separate PLC touch screen ,operate convenient .

4) Printing department, die cutting department is  equipped with automatic zero set device,

(general carton using automatic zero device,  testing-run two pieces cardboard can be adjusted to the correct position).

5) Automatic lift and down forme of the device, printing anilox roller in order to lift

and down (computer delay), avoid printing plate print ink for many times.

6) There is lack of ink alarm device, the real-time monitoring for the ink system working state, avoid working without ink.

7) 10 inches color touch screen control feeding

paper department, order storage, memory

Restoration Production speed 30, 60, 90 cruise constant speed , infrared photoelectric counting, Set in advance , order form processing the quantity.

The feeding paperboard unit is separated with the first color, so it can improve the feeding precision ,and printing precision.

B .Printing department(Optional 1-4 color printing unit)

1. configurations :

1) The steel tube surface grinding , hard chrome plating, do balance correction, steady operation.

2)Full Plate Hanging plate slot, suitable for 9 mm plate of the article.

3)Loading and unloading of the print plate , pedal switch of electric control forward and reversing.

4) The steel tube surface grinding , hard chrome plating

5)anilox roller number is  200, 220,240.(mesh optional)

6)Do balance correction, smooth and steady operation, lattice point is consistent, uniform inking.

7) Anilox roller wedge type overrunning clutch, distributing, wash ink is convenient swift.

8) Anilox roller adopt Chinese famous brand HAILI .

9) rubber roller is from Chinese very famous brand JIZHOU ,

2. Phase adjustment mechanism:

1) Planetary gear structure.

2) Printing phase electric digital 360 degrees adjustment (motion and stop all can be adjusted)

3) Manually adjust the horizontal position, adjust the distance ±10 mm. (optional

electric adjustment, the computer control).

3. Ink circulation

1) Pneumatic diaphragm pump, ink stability, convenient operation and maintenance.

2) ink filter, filtering impurities.

4. Printing phase fixing device

1) Cylinder type brake device .

2) When the machine separate adjustment phase, the brake institutions limit the

machine running, keeping the original gear fixed point position.

5,Oil supply device:

1) mechanical oil pump (double oil pump , oil supply loop)

2) Circulation oil, gear inking amount evenly, each group of oil level balance.

C .Rotary die cutter Department (optional die cutter with slotter in one unit )

1) Die cutting thickness is :16 to 18 mm (three layer board), 13-15 mm (five layer board).

2) slotting and rotary die-cutting is in one unit, can save money for the users, and THE effect of slotting is better than common type slotting, as there is rubber in the last unit.